Psion Teklogix PowerScan Hand-Held
Manuals and User Guides for Psion Teklogix PowerScan Hand-Held. We found 1 manuals for free downloads Reference guide
Below you will find brief information for bar code scanner PowerScan Hand-Held. This is a quick reference guide containing information that can help you use your new scanning device right out of the box. You will find information about how to install the device, how to scan a bar code, the distance you should hold your scanner from the bar code, and how to test the scanner. You can also find information about the supported barcode symbologies and how to troubleshoot common issues. This manual will give you the information you need to get started scanning right out of the box.
Key Features
Hand-held bar code scanner
Easy to use
Multiple symbologies supported
Various depth of field options
Enhanced scanning for hard-to-read bar codes
Designed for ease of use
Multiple languages supported
User-friendly interface
High-quality scanning
Pages: 28 Psion Teklogix PowerScan Hand-Held Reference guide
Brand: Psion Teklogix Category: Bar code readers Size: 1 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
How do I install the scanner?
Connect the interface cable to the proper port on the host terminal. If your system requires an AC/DC adapter to power the scanner, connect the adapter's power cord at the I/F connector and the AC/DC adapter at the wall outlet. Verify operation by pointing at a flat surface and pulling the trigger. A red beam should be visible. Scan a sample bar code and confirm that the scanner reads the bar code by beeping and/ or sending the data to the host terminal.
How do I scan a bar code?
Point the scanner at a slight angle to the bar code. Do not hold the scanner perpendicular to the bar code. Ensure the laser beam crosses the entire bar code.
What is the scanning range of the scanner?
The scanning range will vary depending on the model of the scanner. The 'Scanning Range' section of this document provides specific information on each model type and the corresponding depth of field.
What bar code symbologies are supported?
The default symbologies enabled are Code 39, Code 128, and Interleaved 2 of 5.
How do I troubleshoot problems with my scanner?
The 'Troubleshooting' section of this document provides steps to help you diagnose and resolve common problems. If you are still unable to resolve the issue, contact your nearest Datalogic dealer.
advertisement